Dell Inspiron 5370 Inspiron 13 5000 Service Manual - Page 19
Replacing the base cover, Procedure
View all Dell Inspiron 5370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Replacing the base cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Connect the battery cable to the system board, if applicable. CAUTION: To avoid accidental damage to the power-adapter port, do not press the base cover against the power-adapter port when you snap the base cover to the computer base. 2 Place the base cover on the palm-rest and keyboard assembly, and snap the base cover into place starting from the power-adapter port. 3 Replace the seven screws (M2.5x4) that secure the base cover to the palm-rest and keyboard assembly. 4 Tighten the three captive screws that secure the base cover to the palm-rest and keyboard assembly. 19