Dell Inspiron 5370 Inspiron 13 5000 Service Manual - Page 88

Replacing the display panel, Procedure, Post-requisites

Page 88 highlights

Replacing the display panel WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Place the display panel on a flat and clean surface. 2 Connect the display cable to the connector at the back of the display panel and close the latch to secure the cable. 3 Adhere the tape that secures the display cable to the back of the display panel. 4 Align the screw holes on the display panel with the screw holes on the display back-cover and antenna assembly. 5 Replace the four screws (M2 x2.5) that secure the display panel to the display back-cover and antenna assembly. Post-requisites 1 Replace the display bezel. 2 Replace the display assembly. 3 Replace the wireless card. 4 Replace the base cover. 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125

Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Place the display panel on a
flat
and clean surface.
2
Connect the display cable to the connector at the back of the display panel and
close the latch to secure the cable.
3
Adhere the tape that secures the display cable to the back of the display panel.
4
Align the screw holes on the display panel with the screw holes on the display
back-cover and antenna assembly.
5
Replace the four screws (M2 x2.5) that secure the display panel to the display
back-cover and antenna assembly.
Post-requisites
1
Replace the
display bezel
.
2
Replace the
display assembly
.
3
Replace the
wireless card
.
4
Replace the
base cover
.
88