Dell Inspiron 5370 Inspiron 13 5000 Service Manual - Page 75
Post-requisites, Entering the Service Tag in the BIOS setup program
View all Dell Inspiron 5370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
11 Connect the display cable to the system board. Post-requisites 1 Replace the memory module. 2 Replace the heat sink. 3 Replace the fan. 4 Replace the solid-state drive. 5 Replace the battery. 6 Replace the base cover. Entering the Service Tag in the BIOS setup program 1 Turn on or restart your computer. 2 Press F2 when the Dell logo is displayed to enter the BIOS setup program. 3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input field. NOTE: Service tag is the alphanumeric identifier located at the back side of your computer. 75
11
Connect the display cable to the system board.
Post-requisites
1
Replace the
memory module
.
2
Replace the
heat sink
.
3
Replace the
fan
.
4
Replace the
solid-state drive
.
5
Replace the
battery
.
6
Replace the
base cover
.
Entering the Service Tag in the BIOS setup
program
1
Turn on or restart your computer.
2
Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3
Navigate to the
Main
tab and enter the Service Tag in the
Service Tag Input
field.
NOTE: Service tag is the alphanumeric
identifier
located at the back side of
your computer.
75