Dell Inspiron Mini Duo 1090 Inspiron Duo Service Manual - Page 39
Replacing the Palm-Rest Assembly
View all Dell Inspiron Mini Duo 1090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
1 left hall-sensor cable connector 3 palm-rest assembly 5 touch-pad cable connector 2 screws (4) 4 right hall-sensor cable connector CAUTION: Carefully separate the palm-rest assembly from the computer base to avoid damage to the palm-rest assembly. 9. Using a plastic scribe, carefully pry out the palm-rest assembly along the rear edge and then ease the palm-rest assembly from the computer base. 1 palm-rest assembly 2 plastic scribe 10. Lift the palm-rest assembly off the computer base. Replacing the Palm-Rest Assembly 1. Follow the instructions in Before You Begin. 2. Align the palm-rest assembly on the computer base and gently snap the palm-rest assembly into place. 3. Slide the touch-pad cable, left hall-sensor cable, and right hall-sensor cable into the connectors on the system board and press down on the connector latches to secure them. 4. Replace the four screws that secure the palm-rest assembly to the computer base. 5. Replace the keyboard (see Replacing the Keyboard). 6. Replace the six screws to the computer base. 7. Replace the label door (see Replacing the Label Door).