Dell Latitude 13 3380 Latitude 3380 Owners Manual - Page 28

Installing coin cell battery

Page 28 highlights

b base cover c battery 3 To remove the coin cell battery: a Disconnect the battery cable from its connector on the system board [1]. b Lift up the plastic shields that secure the cable to the system and release the cable [2]. c Lift and remove the coin cell from the system [3]. NOTE: A strong adhesive is used on the coin battery; a bit of force is needed to peel up the battery from the palmrest. Installing coin cell battery 1 Place the coin cell battery into the system. 2 Route the battery cable under the plastic shields on the system. 3 Connect the coin cell battery cable to the connector on the system board. 4 Install the: a battery b base cover c microSD card 5 Follow the procedure in After working inside your computer. 28 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

b
base cover
c
battery
3
To remove the coin cell battery:
a
Disconnect the battery cable from its connector on the system board [1].
b
Lift up the plastic shields that secure the cable to the system and release the cable [2].
c
Lift and remove the coin cell from the system [3].
NOTE:
A strong adhesive is used on the coin battery; a bit of force is needed to peel up the battery from the palmrest.
Installing coin cell battery
1
Place the coin cell battery into the system.
2
Route the battery cable under the plastic shields on the system.
3
Connect the coin cell battery cable to the connector on the system board.
4
Install the:
a
battery
b
base cover
c
microSD card
5
Follow the procedure in
After working inside your computer
.
28
Removing and installing components