Dell Latitude 13 3380 Latitude 3380 Owners Manual - Page 30

Installing speakers, Display assembly, Removing the display assembly

Get Dell Latitude 13 3380 PDF manuals and user guides View all Dell Latitude 13 3380 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Installing speakers 1 Place the speakers into the slots on the computer. 2 Route the speaker cable through the routing channel. 3 Affix the adhesive tape to secure the speaker cable to the computer. 4 Connect the speaker cable to the connector on the system board. 5 Install the: a battery b base cover c microSD card 6 Follow the procedure in After working inside your computer. Display assembly Removing the display assembly NOTE: This process is for both nontouch and touch LCDs 1 Follow the procedure in Before working inside your computer. 2 Remove the: a microSD card b base cover c battery d WLAN Card e DC-IN board 3 Remove the screw that secures the metal bracket of the display cable [1] and remove it from the system [2]. Then, remove the cable from the system board [3] and flip over the computer [4]. 30 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Installing speakers
1
Place the speakers into the slots on the computer.
2
Route the speaker cable through the routing channel.
3
Affix
the adhesive tape to secure the speaker cable to the computer.
4
Connect the speaker cable to the connector on the system board.
5
Install the:
a
battery
b
base cover
c
microSD card
6
Follow the procedure in
After working inside your computer
.
Display assembly
Removing the display assembly
NOTE:
This process is for both nontouch and touch LCDs
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
microSD card
b
base cover
c
battery
d
WLAN Card
e
DC-IN board
3
Remove the screw that secures the metal bracket of the display cable [1] and remove it from the system [2]. Then, remove the cable
from the system board [3] and
flip
over the computer [4].
30
Removing and installing components