Dell Latitude 13 3380 Latitude 3380 Owners Manual - Page 32
Installing display assembly, System board, Removing system board
View all Dell Latitude 13 3380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing display assembly 1 Place the display assembly to align with the screw holders on the computer. 2 Tighten the M1.6xL2 screws to secure the display assembly to the computer. 3 Turn over the computer 4 Connect the display cable to the connector. 5 Place the metal bracket over the connector and tighten the screw to secure the display cable to the computer. 6 Install the: a WLAN card b DC-IN board c battery d base cover e microSD card 7 Follow the procedure in After working inside your computer System board Removing system board 1 Follow the procedure in Before working inside your computer. 2 Remove the: a microSD card b base cover c battery d WLAN card e memory module f heat sink g fan h DCin 3 Remove the screw that secures the metal bracket of the display cable [1] and remove it from the system [2]. Then, remove the eDP cable from the system board [3] and disconnect the coin cell battery cable from its connector on the system board [4]. 32 Removing and installing components