Dell Latitude 5430 Chromebook Service Manual - Page 34

Touchpad, Removing the touchpad

Get Dell Latitude 5430 Chromebook PDF manuals and user guides View all Dell Latitude 5430 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Steps 1. Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Adhere the tapes that secure the antenna cables to the system board. 4. Connect the speaker cable to the connector on the system board and close the latch. 5. Connect the touchpad cable to the connector on the system board and close the latch. 6. Connect the keyboard cable to the connector on the system board and close the latch. 7. Connect the keyboard-backlight cable to the connector on the system board and close the latch. 8. Connect the fingerprint reader cable to the connector on the system board and close the latch. Next steps 1. Install the solid-state drive. 2. Install the wireless card. 3. Install the battery. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following images indicate the location of the touchpad and provide a visual representation of the removal procedure. 34 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Steps
1.
Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly.
2.
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3.
Adhere the tapes that secure the antenna cables to the system board.
4.
Connect the speaker cable to the connector on the system board and close the latch.
5.
Connect the touchpad cable to the connector on the system board and close the latch.
6.
Connect the keyboard cable to the connector on the system board and close the latch.
7.
Connect the keyboard-backlight cable to the connector on the system board and close the latch.
8.
Connect the fingerprint reader cable to the connector on the system board and close the latch.
Next steps
1.
Install the
solid-state drive
.
2.
Install the
wireless card
.
3.
Install the
battery
.
4.
Install the
base cover
.
5.
Follow the procedure in
After working inside your computer
.
Touchpad
Removing the touchpad
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
About this task
The following images indicate the location of the touchpad and provide a visual representation of the removal procedure.
34
Removing and installing components