Dell Latitude 5430 Chromebook Service Manual - Page 42

HeatSink, Removing the heat sink

Get Dell Latitude 5430 Chromebook PDF manuals and user guides View all Dell Latitude 5430 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Steps 1. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly. 2. Replace the two screws (M2.5x4) that secure the fan to the palm-rest and keyboard assembly. 3. Connect the fan cable to the connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. HeatSink Removing the heat sink Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task CAUTION: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure. 42 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Steps
1.
Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
2.
Replace the two screws (M2.5x4) that secure the fan to the palm-rest and keyboard assembly.
3.
Connect the fan cable to the connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
HeatSink
Removing the heat sink
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
About this task
CAUTION:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool
before you touch it.
NOTE:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin
can reduce the heat transfer capability of the thermal grease.
The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure.
42
Removing and installing components