Dell Latitude 5430 Chromebook Service Manual - Page 36

Align the screw holes on the touchpad bracket to the screw holes on the palm-rest and keyboard assembly.

Get Dell Latitude 5430 Chromebook PDF manuals and user guides View all Dell Latitude 5430 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Steps 1. Place the touchpad on the palm-rest and keyboard assembly. 2. Turn the computer over and open the display to ensure that the touchpad is equally aligned on all sides. 3. Close the display and turn the computer over again. 4. Replace the two screws (M2x1.8) that secure the touchpad to the palm-rest and keyboard assembly. 5. Connect the touchpad cable to the connector on the touchpad and close the latch. 6. Connect the touchpad cable to the connector on the system board and close the latch. 7. Place the touchpad bracket on the touchpad. 8. Align the screw holes on the touchpad bracket to the screw holes on the palm-rest and keyboard assembly. 9. Replace the three screws (M1.6x2) that secure the touchpad bracket to the palm-rest and keyboard assembly. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. 36 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Steps
1.
Place the touchpad on the palm-rest and keyboard assembly.
2.
Turn the computer over and open the display to ensure that the touchpad is equally aligned on all sides.
3.
Close the display and turn the computer over again.
4.
Replace the two screws (M2x1.8) that secure the touchpad to the palm-rest and keyboard assembly.
5.
Connect the touchpad cable to the connector on the touchpad and close the latch.
6.
Connect the touchpad cable to the connector on the system board and close the latch.
7.
Place the touchpad bracket on the touchpad.
8.
Align the screw holes on the touchpad bracket to the screw holes on the palm-rest and keyboard assembly.
9.
Replace the three screws (M1.6x2) that secure the touchpad bracket to the palm-rest and keyboard assembly.
Next steps
1.
Install the
battery
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
36
Removing and installing components