Dell Latitude 6430u Owners Manual - Page 13

Installing the WLAN Card, Removing the Wireless Wide Area network (WWAN) Card, Installing the WWAN

Get Dell Latitude 6430u PDF manuals and user guides View all Dell Latitude 6430u manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Installing the WLAN Card 1. Insert the WLAN card into its connector at a 45-degree angle into its slot. 2. Press the WLAN card down and tighten the screw to secure the WLAN card to the computer. 3. Connect the antenna cables to their respective connectors marked on the WLAN card. 4. Install: a) base cover b) SD card c) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Wireless Wide Area network (WWAN) Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) SD card c) base cover 3. Disconnect the antenna cables from the WWAN card. 4. Remove the screw that secures the WWAN card to the computer. 5. Disconnect the antenna cables from the WWAN card. Remove the screw that secures the WWAN card to the computer and remove it. Installing the WWAN Card 1. Place the WWAN card in its slot in the system board. 2. Press the WWAN card down and tighten the screw to secure the WWAN card to the computer. 3. Connect the antenna cables to their respective connectors marked on the WWAN card. 4. Install: a) base cover b) SD card 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Installing the WLAN Card
1.
Insert the WLAN card into its connector at a 45–degree angle into its slot.
2.
Press the WLAN card down and tighten the screw to secure the WLAN card to the computer.
3.
Connect the antenna cables to their respective connectors marked on the WLAN card.
4.
Install:
a)
base cover
b)
SD card
c)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Wide Area network (WWAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
SD card
c)
base cover
3.
Disconnect the antenna cables from the WWAN card.
4.
Remove the screw that secures the WWAN card to the computer.
5.
Disconnect the antenna cables from the WWAN card. Remove the screw that secures the WWAN card to the
computer and remove it.
Installing the WWAN Card
1.
Place the WWAN card in its slot in the system board.
2.
Press the WWAN card down and tighten the screw to secure the WWAN card to the computer.
3.
Connect the antenna cables to their respective connectors marked on the WWAN card.
4.
Install:
a)
base cover
b)
SD card
13