Dell Latitude 6430u Owners Manual - Page 21

Installing the Fingerprint-Scanner Board, Removing the Display Bezel - keyboard

Get Dell Latitude 6430u PDF manuals and user guides View all Dell Latitude 6430u manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

e) palmrest assembly 3. Un-route the fingerprint-scanner cable. Remove the screw that secures the fingerprint-scanner bracket to the computer and remove the fingerprint-scanner bracket. Remove the fingerpint-scanner board from the computer Installing the Fingerprint-Scanner Board 1. Place the fingerprint-scanner in its slot on the computer. 2. Place the fingerprint-scanner bracket on it and tighten the screw to secure the fingerprint-scanner bracket to the computer. 3. Route the fingerprint scanner cable. 4. Install: a) palmrest assembly b) keyboard c) base cover d) SD card e) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Display Bezel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Pry the sides and work around the corners of the display bezel and remove it from the display assembly. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
e)
palmrest assembly
3.
Un-route the fingerprint-scanner cable. Remove the screw that secures the fingerprint-scanner bracket to the
computer and remove the fingerprint-scanner bracket. Remove the fingerpint-scanner board from the computer
Installing the Fingerprint-Scanner Board
1.
Place the fingerprint-scanner in its slot on the computer.
2.
Place the fingerprint-scanner bracket on it and tighten the screw to secure the fingerprint-scanner bracket to the
computer.
3.
Route the fingerprint scanner cable.
4.
Install:
a)
palmrest assembly
b)
keyboard
c)
base cover
d)
SD card
e)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the battery.
3.
Pry the sides and work around the corners of the display bezel and remove it from the display assembly.
21