Dell Latitude CSx H Service Manual - Page 20

hinge, the wire is removed without removing the left hinge.

Get Dell Latitude CSx H PDF manuals and user guides View all Dell Latitude CSx H manuals
Add to My Manuals
Save this manual to your list of manuals
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
12
Dell Latitude CS Portable Computers Service Manual
5.
Remove the two M2.6 x 6-mm hinge screws that secure the left hinge to
the bottom case.
6.
Carefully disconnect the display-assembly interface wire connector,
located on the left side of the display assembly, from the system board.
The female connector attached to the display-assembly interface wire is
keyed to fit into the male connector one way only.
On some models, the interface wire is routed under the left hinge. To
remove the wire from under the hinge, remove all three M2 X 4-mm
screws attaching the left hinge to the display-assembly top cover (see Fig-
ure 11). For models that do not route the interface wire under the left
hinge, the wire is removed without removing the left hinge.
7.
Carefully disconnect the display-assembly inverter wire connector, located
on the right side of the display assembly, from the system board.
The female connector attached to the display-assembly inverter wire is
keyed to fit into the male connector one way only.
8.
Lift the display assembly from the bottom assembly.