Dell Latitude D430 User's Guide - Page 111
To replace the keyboard, connect the keyboard cable to the connector on the system board.
View all Dell Latitude D430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
a Remove the three M2 x 3-mm screws across the top of the keyboard. NOTICE: Lift the keyboard carefully in step b to ensure that you do not pull the keyboard wire. b Slide the keyboard forward to gain access to the two keyboard connectors. c Pull up on the plastic bar on the keyboard connectors to disconnect the keyboard connectors from the system board. 1 2 3 4 1 M2 x 3-mm screws (3) 2 4 plastic bar on keyboard connectors keyboard 3 tabs (4) NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place. 4 To replace the keyboard, connect the keyboard cable to the connector on the system board. 5 Place the tabs along the front edge of the keyboard into the palm rest, and lay the keyboard down on the palm rest. 6 Replace the three screws at the top of the keyboard. 7 Replace the hinge cover. Adding and Replacing Parts 111