Dell Latitude E7240 Owner's Manual - Page 14

Installing the Base Cover, Removing the mSATA SSD Card, Removing the Keyboard Trim

Get Dell Latitude E7240 PDF manuals and user guides View all Dell Latitude E7240 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Installing the Base Cover 1. Place the base cover to align with the screw holes correctly on the computer. 2. Tighten the screws to secure the base cover to the computer. 3. Install battery. 4. Follow the procedures in After Working Inside Your Computer. Removing the mSATA SSD Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) SD card c) base cover 3. Remove the screw that secures the mSATA SSD card and remove the mSATA SSD card from the computer. Installing the mSATA SSD Card 1. Place the mSATA SSD card in its slot in the computer. 2. Tighten the screw to secure the mSATA SSD card to the computer. 3. Install: a) base cover b) SD card c) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Keyboard Trim 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove battery. 3. Using a plastic scribe, pry the keyboard trim to release it from the computer. Lift up to remove the keyboard trim from the computer. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
Installing the Base Cover
1.
Place the base cover to align with the screw holes correctly on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Install battery.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the mSATA SSD Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
SD card
c)
base cover
3.
Remove the screw that secures the mSATA SSD card and remove the mSATA SSD card from the computer.
Installing the mSATA SSD Card
1.
Place the mSATA SSD card in its slot in the computer.
2.
Tighten the screw to secure the mSATA SSD card to the computer.
3.
Install:
a)
base cover
b)
SD card
c)
battery
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard Trim
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove battery.
3.
Using a plastic scribe, pry the keyboard trim to release it from the computer. Lift up to remove the keyboard trim
from the computer.
14