Dell Latitude E7240 Owner's Manual - Page 35
Enable Legacy Option ROMs - This, Enable UEFI Network Stack: - docking station
View all Dell Latitude E7240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Option Date/Time Table 3. System Configuration Option Integrated NIC Parallel Port Serial Port SATA Operation Drives Description • Enable Legacy Option ROMs - This option is disabled by default. Allows you to set the date and time. Description Allows you to configure the integrated network controller. The options are: • Disabled • Enabled • Enabled w/PXE: This option is enabled by default. • Enable UEFI Network Stack: This allows you to enable UEFI Networking Protocols in pre-OS and early OS networking environment. Allows you to define and set how the parallel port on the docking station operates. You can set the parallel port to: • Disabled • AT • PS2 • ECP (Latitude 7440) Identifies and defines the serial port settings. You can set the serial port to: • Disabled • COM1 (Default Setting) • COM2 • COM3 • COM4 NOTE: The operating system may allocate resources even if the setting is disabled. Allows you to configure the internal SATA hard-drive controller. The options are: • Disabled • AHCI • RAID On (Default Setting) NOTE: SATA is configured to support RAID mode. Allows you to configure the SATA drives on board. The options are: 35