Dell Latitude E7240 Owner's Manual - Page 24
Installing the Display-Hinge Cover, Removing the Heatsink
View all Dell Latitude E7240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing the Display-Hinge Cover 1. Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer. 2. Install battery. 3. Follow the procedures in After Working Inside Your Computer. Removing the Heatsink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD card b) battery c) base cover d) mSATA e) keyboard trim f) keyboard g) palmrest h) display-hinge cover i) display assembly 3. Remove the screws that secure the heatsink to the computer. 4. Perform the following steps as shown in the illustration: a) Lift the heatsink from the computer [1]. b) Remove the heatsink from the computer [2]. 24
Installing the Display-Hinge Cover
1.
Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer.
2.
Install battery.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD card
b)
battery
c)
base cover
d)
mSATA
e)
keyboard trim
f)
keyboard
g)
palmrest
h)
display-hinge cover
i)
display assembly
3.
Remove the screws that secure the heatsink to the computer.
4.
Perform the following steps as shown in the illustration:
a)
Lift the heatsink from the computer [1].
b)
Remove the heatsink from the computer [2].
24