Dell Latitude E7240 Owner's Manual - Page 22

Removing the Coin-Cell Battery, Installing the Coin-Cell Battery

Get Dell Latitude E7240 PDF manuals and user guides View all Dell Latitude E7240 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

5. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD card b) battery c) base cover d) keyboard trim e) keyboard f) palmrest 3. Remove the screw that secures to the system board. 4. Perform the following steps as shown in the illustration: a) Lift the latch that secure cable to the computer [1]. b) Disconnect the I/O cables from the system board [2]. 5. Disconnect from the system board. Unroute the cables from the slot and remove the coin-cell battery from the computer. Installing the Coin-Cell Battery 1. Place the coin-cell battery in its slot. 2. Route the cables and connect the coin-cell battery cable to the system board. 3. Tighten the screw that secures the coin-cell battery to the system board. 4. Install: a) palmrest b) keyboard c) keyboard trim d) base cover e) battery f) SD card 5. Follow the procedures in After Working Inside Your Computer. 22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD card
b)
battery
c)
base cover
d)
keyboard trim
e)
keyboard
f)
palmrest
3.
Remove the screw that secures to the system board.
4.
Perform the following steps as shown in the illustration:
a)
Lift the latch that secure cable to the computer [1].
b)
Disconnect the I/O cables from the system board [2].
5.
Disconnect from the system board. Unroute the cables from the slot and remove the coin-cell battery from the
computer.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery in its slot.
2.
Route the cables and connect the coin-cell battery cable to the system board.
3.
Tighten the screw that secures the coin-cell battery to the system board.
4.
Install:
a)
palmrest
b)
keyboard
c)
keyboard trim
d)
base cover
e)
battery
f)
SD card
5.
Follow the procedures in
After Working Inside Your Computer
.
22