Dell N3200-ON EMC Networking N-Series Switches User Guide version 6.6.3 - Page 1362

Command Purpose redistribute ospf [metric Configure RIP to redistribute routes from OSPF. metric] [match [internal] [external 1] [external 2] [nssa-external 1] [nssaexternal 2]] • ospf- Specifies OSPF as the source protocol. • metric - Specifies the metric to use when redistributing the route. Range: 1-15. • internal - Adds internal matches to any match types presently being redistributed. • external 1 - Adds routes imported into OSPF as Type1 external routes into any match types presently being redistributed. • external 2 - Adds routes imported into OSPF as Type2 external routes into any match types presently being redistributed. • nssa-external 1 - Adds routes imported into OSPF as NSSA Type-1 external routes into any match types presently being redistributed. • nssa-external 2 - Adds routes imported into OSPF as NSSA Type-2 external routes into any match types presently being redistributed. redistribute bgp [metric Configure RIP to redistribute routes from BGP (not metric] recommended as the default metric from BGP is 15) . • metric - Specifies the metric to use when redistributing the route. Range: 1-15. The value 15 indicates an infinite or unreachable value. distance rip integer Set the route preference value of RIP in the router (Range 1-255). Lower route preference values are preferred over higher values when determining the best route. exit Exit to Global Config mode. exit Exit to Privileged Exec mode. show ip rip View information about the RIP route distribution configuration. 1362 RIP