Dell N3200-ON EMC Networking N-Series Switches User Guide version 6.6.3 - Page 496

Command Purpose clock summer-time Use this command if the summer time does not start and date {date month | end every year according to a recurring pattern. Enter the month date} year month and then the date, or the date and then the month. hh:mm {date month | • date- Day of the month. (Range: 1-31.) month date} year hh:mm [offset offset] • month - Month. (Range: The first three letters by name) [zone acronym] • hh:mm - Time in 24-hour format in hours and minutes. (Range: hh: 0-23, mm: 0-59) • offset - Number of minutes to add during the summertime. (Range:1-1440) • acronym - The acronym for the time zone to be displayed when summertime is in effect. (Range: Up to four characters) CTRL + Z Exit to Privileged Exec mode. show clock [detail] View information about the time. Include the detail keyword to view information about the time zone and summer time. Configuring the Expansion Slots This section applies to Dell EMC Networking N3000E-ON/N3100-ON Series Only. Use the following commands to configure and view information about the expansion slots and plug-in modules (cards). Command Purpose configure Enter Global Configuration mode. slot unit/slot cardindex Configured the specified slot (1-2) to use the plug-in module identified by the cardindex number (CID). To view the CID associated with each plug-in module, use the show supported cardtype command. CTRL + Z Exit to Privileged Exec mode. show slot Display status information about the expansion slots. show supported cardtype Display information about the plug-in modules the switch supports. 496 Managing General System Settings