Dell N3200-ON EMC Networking N-Series Switches User Guide version 6.6.3 - Page 697

the difference is that all sticky addresses for an interface are removed from the running-config when the interface is taken out of sticky mode. Static addresses must be removed from the running-config individually. Sticky MAC addresses appear in the running-config in the following form: switchport port-security mac-address sticky 0011.2233.4455 vlan 33 Statically locked MAC addresses appear in the running-config in the following form: switchport port-security mac-address 0011.2233.4455 vlan 33 Default Port Security Values Table 18-1 lists the default values for the Port Security feature. Table 18-1. Default Port Security Values Feature Port security Port security traps Maximum learned MAC addresses Maximum static MAC addresses Monitor mode Description Unlocked Enabled 600 (when locked) 100 Disabled Configuring Port Security Configuration (Web) This section provides information about the OpenManage Switch Administrator pages for configuring and monitoring the IEEE 802.1X features and Port Security on Dell EMC Networking Series switches. For details about the fields on a page, click at the top of the Dell EMC OpenManage Switch Administrator web page. Port Security Use the Port Security page to enable MAC locking on a per-port basis. When a port is locked, a limit can be specified for the number of source MAC addresses that are allowed to transmit traffic on the port. Port and System Security 697