Dell N3200-ON EMC Networking N-Series Switches User Guide version 6.6.3 - Page 348

Accounting Accounting is used to record security events, such as a user logging in or executing a command. Accounting records may be sent upon completion of an event (stop-only) or at both the beginning and end of an event (startstop). There are three types of accounting: commands, Dot1x, and exec. • Commands-Sends accounting records for command execution. • Dot1x-Sends accounting records for network access. • Exec-Sends accounting records for management access (logins). For more information about the data sent in accounting records, see "Which RADIUS Attributes Does the Switch Support?" on page 305 and "Using TACACS+" on page 308. Table 9-10 shows the valid methods for each type of accounting: Table 9-10. Accounting Methods Method radius tacacs Commands no yes Dot1x yes no Exec yes yes RADIUS Accounting Dell EMC Networking N-Series switches support RADIUS accounting. The supported accounting types are start-only or start-stop. The following attributes may be sent in the Accounting Stop record that is sent to the RADIUS server when the switch is configured for 802.1X accounting: • User-Name (1) • NAS-IP-Address (4) • Framed-IP-Address (8) • Called-Station-Id (30) • Calling-Station-Id (31) • NAS-Identifier (33) • NAS-Port-Type (61) 348 Authentication, Authorization, and Accounting