Dell OptiPlex 3020M Dell OptiPlex 3020M Owners Manual - Page 28
Installing the Hard Drive, Removing the Heatsink
View all Dell OptiPlex 3020M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the Hard Drive 1. Insert the hard drive into the hard-drive bracket. 2. Align and place the hard-drive assembly to its slot on the computer. 3. Install the cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Heatsink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. cover b. processor fan module 3. Perform the following steps as shown in the illustration: a. Remove the screws that secure the heatsink to the system board [1]. b. Lift the heatsink away from the system board [2]. 28
Installing the Hard Drive
1.
Insert the hard drive into the hard-drive bracket.
2.
Align and place the hard-drive assembly to its slot on the computer.
3.
Install the
cover
.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
cover
b.
processor fan module
3.
Perform the following steps as shown in the illustration:
a.
Remove the screws that secure the heatsink to the system board [1].
b.
Lift the heatsink away from the system board [2].
28