Dell OptiPlex 3046 Small Form Factor Small Form Factor Owners Manual - Page 5
Working on your computer, Before working inside your computer, Turning Off Your Computer — Windows 7
View all Dell OptiPlex 3046 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 Working on your computer Before working inside your computer To avoid damaging your computer, perform the following steps before you begin working inside the computer. 1 Ensure that your work surface is flat and clean to prevent the computer cover from being scratched. 2 Turn off your computer (see Turning off your computer). CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device. 3 Disconnect all network cables from the computer. 4 Disconnect your computer and all attached devices from their electrical outlets. 5 Press and hold the power button while the computer is unplugged to ground the system board. 6 Remove the cover. CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components. Turning off your computer Turning Off Your Computer - Windows 7, 8 CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer. 1 Shut down the operating system: • In Windows 8: • Using a mouse: a Point to upper-right corner of the screen and click Settings. b Click the • In Windows 7: and select Shut down. 1 Click Start . 2 Click Shut Down. or 1 Click Start . Working on your computer 5