Dell OptiPlex 3046 Small Form Factor Small Form Factor Owners Manual - Page 9
Installing the fan duct, Removing the memory module, Installing the memory module
View all Dell OptiPlex 3046 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the fan duct 1 Align the slots on the fan duct, with the screws on the heat sink. 2 Insert the fan duct until it clicks into place. 3 Install the cover. 4 Follow the procedure in After Working Inside Your Computer. Removing the memory module 1 Follow the procedure in Before Working Inside Your Computer. 2 Remove the: a cover b fan duct c hard drive assembly d optical drive 3 To remove the memory module: a Press the memory module retention tabs on both sides of the memory module. b Lift the memory module from the memory module connector on the system board. Installing the memory module 1 Align the notch on the memory module with the tab on the memory module connector. 2 Insert the memory module into the memory module socket. 3 Press the memory module until the memory module retention tabs click into place. 4 Install the: a optical drive b hard drive assembly Removing and installing components 9