Dell OptiPlex 3060 Tower Setup and specifications guide - Page 20
Security
View all Dell OptiPlex 3060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Security Table 21. Security Option Admin Password System Password Internal HDD-0 Password Strong Password Password Configuration Password Bypass Description Allows you to set, change, and delete the admin password. Allows you to set, change, and delete the system password. Allows you to set, change, and delete the computer's internal HDD. This option lets you enable or disable strong passwords for the system. Allows you to control the minimum and maximum number of characters allowed for a administrative password and the system password. The range of characters is between 4 and 32. This option lets you bypass the System (Boot) Password and the internal HDD password prompts during a system restart. • Disabled - Always prompt for the system and internal HDD password when they are set. This option is disabled by default. • Reboot Bypass - Bypass the password prompts on Restarts (warm boots). NOTE: The system will always prompt for the system and internal HDD passwords when powered on from the off state (a cold boot). Also, the system will always prompt for passwords on any module bay HDDs that may be present. Password Change This option lets you determine whether changes to the System and Hard Disk passwords are permitted when an administrator password is set. Allow Non-Admin Password Changes - This option is enabled by default. UEFI Capsule Firmware Updates TPM 2.0 Security This option controls whether this system allows BIOS updates via UEFI capsule update packages. This option is selected by default. Disabling this option will block BIOS updates from services such as Microsoft Windows Update and Linux Vendor Firmware Service (LVFS) Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system. • TPM On (default) • Clear • PPI Bypass for Enable Commands • PPI Bypass for Disable Commands • PPI Bypass for Clear Commands • Attestation Enable (default) • Key Storage Enable (default) • SHA-256 (default) Choose any one option: • Disabled • Enabled (default) Computrace This field lets you Activate or Disable the BIOS module interface of the optional Computrace Service from Absolute Software. Enables or disables the optional Computrace service designed for asset management. • Deactivate • Disable • Activate - This option is selected by default. Chassis Intrusion This field controls the chassis intrusion feature. Choose any one of the option: • Disabled (default) • Enabled 20 System setup