Dell OptiPlex 3060 Tower Setup and specifications guide - Page 24
Virtualization support, Wireless options
View all Dell OptiPlex 3060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Table 26. POST Behavior (continued) Option Description Extend BIOS POST Time • Minimal - The system boots quickly, unless the BIOS has been updated, memory changed, or the previous POST did not complete. • Thorough - The system does not skip any steps in the boot process. • Auto - This allows the operating system to control this setting (this works only when the operating system supports Simple Boot Flag). This option is set to Thorough by default. This option creates an additional pre-boot delay. • 0 seconds (default) • 5 seconds • 10 seconds Full Screen Logo Warnings and Errors This option will display full screen logo if your image match screen resolution. The option Enable Full Screen Logo is not set by default. This option causes the boot process to only pause when warning or errors are detected. Choose any one of the option: • Prompt on Warnings and Errors • Continue on Warnings • Continue on Warnings and Errors Virtualization support Table 27. Virtualization Support Option Description Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by the Intel Virtualization technology. • Enable Intel Virtualization Technology This option is set by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by the Intel Virtualization technology for direct I/O. • Enable VT for Direct I/O This option is set by default. Wireless options Table 28. Wireless Option Wireless Device Enable Description Allows you to enable or disable the internal wireless devices. The options are: • WLAN/WiGig • Bluetooth All the options are enabled by default. 24 System setup