Dell OptiPlex 3060 Tower Setup and specifications guide - Page 25

Maintenance Table 29. Maintenance Option Service Tag Asset Tag SERR Messages BIOS Downgrade Bios Recovery First Power On Date Description Displays the service tag of your computer. Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled. Allows you to flash previous revisions of the system firmware. • Allow BIOS Downgrade This option is set by default. BIOS Recovery from Hard Drive-This option is set by default. Allows you to recover the corrupted BIOS from a recovery file on the HDD or an external USB key. BIOS Auto-Recovery- Allows you to recover the BIOS automatically. NOTE: BIOS Recovery from Hard Drive field should be enabled. Always Perform Integrity Check-Performs integrity check on every boot. Allows you the set Ownership date. The option Set Ownership Date is not set by default. System logs Table 30. System Logs Option BIOS events Description Allows you to view and clear the System Setup (BIOS) POST events. Advanced configuration Table 31. Advanced configuration Option Description ASPM Allows you to set the ASPM level. • Auto (default) - There is handshaking between the device and PCI Express hub to determine the best ASPM mode supported by the device • Disabled - ASPM power management is turned off at all time • L1 Only - ASPM power management is set to use L1 SupportAssist System Resolution Option Description Auto OS Recovery Threshold Allows you to control the automatic boot flow for SupportAssist System. Options are: • Off •1 • 2 (Enabled by default) System setup 25