Dell OptiPlex 330 User's Guide - Page 224
Onboard, Devices, Integrated NIC, Gently push the release tab on the card retention latch and swing
View all Dell OptiPlex 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
speaker/headphone, or line-in connectors on the back panel (see "I/O Panel" on page 253). 15 If you installed an add-in network adapter and want to disable the integrated network adapter: a Enter system setup (see "System Setup" on page 79), go to Onboard Devices and select Integrated NIC, and then change the setting to Off. b Connect the network cable to the add-in network adapter's connectors. Do not connect the network cable to the integrated connector on the back panel (see "I/O Panel" on page 253). 16 Install any drivers required for the card as described in the card documentation. Removing a PCI or PCI Express x16 Card 1 Follow the procedures in "Before You Begin" on page 143. 2 Remove the computer cover (see "Removing the Computer Cover" on page 209). 3 Gently push the release tab on the card retention latch and swing it outward. 4 If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card. • For a PCI card, grasp the card by its top corners, and ease it out of its connector. • For a PCI Express x16 card, pull the securing tab, grasp the card by its top corners, and then ease it out of its connector. 224 Desktop Computer Parts