Dell OptiPlex 5060 Tower Service Manual - Page 22
Hard drive assembly—3.5-inch and 2.5-inch, Removing 3.5–inch hard drive assembly
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. Install the: a. Front bezel b. Side cover 3. Follow the procedure in After working inside your computer. Hard drive assembly-3.5-inch and 2.5-inch Removing 3.5-inch hard drive assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel 3. To remove the hard drive assembly: a. Disconnect the SATA cable and the power cable from the connectors on the hard drive. 22 Removing and installing components
2.
Install the:
a.
Front bezel
b.
Side cover
3.
Follow the procedure in
After working inside your computer
.
Hard drive assembly—3.5-inch and 2.5-inch
Removing 3.5–inch hard drive assembly
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
3.
To remove the hard drive assembly:
a.
Disconnect the SATA cable and the power cable from the connectors on the hard drive.
22
Removing and installing components