Dell OptiPlex 5060 Tower Service Manual - Page 58
Heat sink, Removing heat sink
![]() |
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. Close the front panel door. 5. Install the: a. Front bezel b. Side cover 6. Follow the procedure in After working inside your computer. Heat sink Removing heat sink 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel 3. Open the front panel door. 4. Remove the heatsink fan. 5. To remove the heat sink: a. Loosen the captive screws (4) that secure the heat sink to the system board [1]. NOTE: Remove the screw in the sequential order (1,2,3,4) as printed on the system board. 58 Removing and installing components
![](/manual_guide/products/dell-optiplex-5060-tower-service-manual-3d09ef7/58.png)
4.
Close the
front panel door
.
5.
Install the:
a.
Front bezel
b.
Side cover
6.
Follow the procedure in
After working inside your computer
.
Heat sink
Removing heat sink
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
3.
Open the
front panel door
.
4.
Remove the
heatsink fan
.
5.
To remove the heat sink:
a.
Loosen the captive screws (4) that secure the heat sink to the system board [1].
NOTE:
Remove the screw in the sequential order (1,2,3,4) as printed on the system board.
58
Removing and installing components