Dell OptiPlex 5060 Tower Service Manual - Page 34
SD card reader, Removing SD card reader
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3. Close the front panel door. 4. Install the: a. Front bezel b. Side cover 5. Follow the procedure in After working inside your computer. SD card reader Removing SD card reader 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel 3. Open the front panel door. 4. To remove the SD card reader: a. Disconnect the SD card reader cable from the connector on the system board [1]. b. Remove the screw that secures the SD card reader to the front panel door [2]. c. Lift the SD card reader out of the system [3]. 34 Removing and installing components
3.
Close the
front panel door
.
4.
Install the:
a.
Front bezel
b.
Side cover
5.
Follow the procedure in
After working inside your computer
.
SD card reader
Removing SD card reader
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
3.
Open the
front panel door
.
4.
To remove the SD card reader:
a.
Disconnect the SD card reader cable from the connector on the system board [1].
b.
Remove the screw that secures the SD card reader to the front panel door [2].
c.
Lift the SD card reader out of the system [3].
34
Removing and installing components