Dell OptiPlex 5060 Tower Service Manual - Page 62
System fan, Removing system fan
![]() |
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4. Install the heatsink. 5. Install the heatsink fan. 6. Close the front panel door. 7. Install the: a. Front bezel b. Side cover 8. Follow the procedure in After working inside your computer. System fan Removing system fan 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel 3. Open the front panel door. 4. To remove the system fan: a. Disconnect the intrusion switch cable from the connector on the system board [1]. b. Unroute the intrusion switch cable from the fan grommet [2]. 62 Removing and installing components
![](/manual_guide/products/dell-optiplex-5060-tower-service-manual-3d09ef7/62.png)
4.
Install the
heatsink
.
5.
Install the
heatsink fan
.
6.
Close the
front panel door
.
7.
Install the:
a.
Front bezel
b.
Side cover
8.
Follow the procedure in
After working inside your computer
.
System fan
Removing system fan
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
3.
Open the
front panel door
.
4.
To remove the system fan:
a.
Disconnect the intrusion switch cable from the connector on the system board [1].
b.
Unroute the intrusion switch cable from the fan grommet [2].
62
Removing and installing components