Dell OptiPlex 5060 Tower Service Manual - Page 59
Installing heat sink, Tighten the screws in a sequential order 1
![]() |
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
b. Lift the heat sink away from the computer [2]. Installing heat sink 1. Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor [1]. 2. Tighten the captive screws to secure the heat sink to the system board [2]. NOTE: Tighten the screws in a sequential order (1,2,3,4) as printed on the system board. Removing and installing components 59
![](/manual_guide/products/dell-optiplex-5060-tower-service-manual-3d09ef7/59.png)
b.
Lift the heat sink away from the computer [2].
Installing heat sink
1.
Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor [1].
2.
Tighten the captive screws to secure the heat sink to the system board [2].
NOTE:
Tighten the screws in a sequential order (1,2,3,4) as printed on the system board.
Removing and installing components
59