Dell OptiPlex 5060 Tower Service Manual - Page 26
Removing the 2.5–inch hard drive assembly, Removing the 2.5–inch drive from the drive bracket
![]() |
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing the 2.5-inch hard drive assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel 3. Open the front panel door. 4. To remove the hard drive assembly: a. Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard drive [1]. b. Press the blue tabs of the assembly on both sides [2] and pull the hard drive assembly out of the system [3]. Removing the 2.5-inch drive from the drive bracket 1. Follow the procedure in Before Working Inside Your Computer. 2. Remove the: a. Side cover b. Front bezel c. 2.5-inch hard drive assembly 3. To remove the drive: a. Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1]. b. Lift the drive out of the drive bracket [2]. 26 Removing and installing components
![](/manual_guide/products/dell-optiplex-5060-tower-service-manual-3d09ef7/26.png)