Dell OptiPlex 755 User's Guide - Page 298
Save/Exit, Create RAID Volume, RAID0Stripe, Creating a RAID Level 0 Configuration
View all Dell OptiPlex 755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
5 Press the left- and right-arrow keys to highlight Save/Exit, and press to exit system setup and resume the boot process. Configuring Your Computer for RAID Using the Intel RAID Option ROM Utility NOTE: Although any size of drives may be used to create a RAID configuration when using the Intel RAID Option ROM utility, ideally the drives should be of equal size. In a RAID level 0 configuration, the size of the configuration will be the size of the smallest drive multiplied by the number of drives in the configuration (two). In a RAID level 1 configuration, the size of the configuration will be the smaller of the two drives used. Creating a RAID Level 0 Configuration NOTICE: You lose any data on your hard drives when you create a RAID configuration using the following procedure. Back up data that you want to keep before continuing. NOTE: Use the following procedure only if you are reinstalling your operating system. Do not use the following procedure to migrate an existing storage configuration to RAID level 0 configuration. 1 Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on page 297). 2 Press when you are prompted to enter the Intel RAID Option ROM utility. 3 Press the up- and down-arrow keys to highlight Create RAID Volume, and press . 4 Enter a RAID volume name or accept the default, and press . 5 Press the up- and down-arrow keys to select RAID0(Stripe), and press . NOTE: Select the stripe size closest to the size of the average file that you want to store on the RAID volume. If you do not know the average file size, choose 128 KB as your stripe size. 6 Press the up- and down-arrow keys to change the stripe size and press . 7 Select the desired capacity for the volume and press . The default value is the maximum available size. 8 Press to create the volume. 9 Press to confirm that you want to create the RAID volume. 10 Confirm that the correct volume configuration is displayed on the main Intel RAID Option ROM utility screen. 11 Press the up- and down-arrow keys to select Exit and press . 12 Install the operating system (see "Restoring Your Operating System" on page 359). Creating a RAID Level 1 Configuration 1 Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on page 297). 2 Press when you are prompted to enter the Intel RAID Option ROM utility. 3 Use the up- and down-arrow keys to highlight Create RAID Volume and press . 298 Advanced Features