Dell OptiPlex GX50 User Guide - Page 68
Installing an Expansion Card, electrical outlets, wait 10 to 20 seconds.
View all Dell OptiPlex GX50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
www.dell.com | support.dell.com NOTE: To meet PC99 requirements, your Dell computer uses only PCI expansion slots. IndustryStandard Architecture (ISA) expansion cards are not supported. NOTICE: Before disconnecting a device from the computer or removing a component from the system board, verify that the standby power light on the system board has turned off. Installing an Expansion Card CAUTION: Before you perform this procedure, see "Safety Instructions." NOTICE: Before disconnecting a device from the computer, wait 10 to 20 seconds after disconnecting the computer from its electrical outlet. Before removing a component from the system board, verify that the standby power light on the system board has turned off. To locate this light, see "System Board Components." 1 If you are replacing an expansion card, remove the current driver for the expansion card from the operating system. 2 Turn off the computer and devices, disconnect them from their electrical outlets, wait 10 to 20 seconds. 3 Open the computer cover. 4 If you have a small desktop computer, remove the expansion-card cage. 66 Instal ling Upgrades