Dell P2422H Users Guide - Page 66
Troubleshooting, Self-Test
View all Dell P2422H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor. This way, the computer doesn't have to be involved. 3. Turn on the monitor. The floating dialog box should appear on-screen (against a black background), if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains white. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen. No VGA Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2X22H or No HDMI Cable The display will go into Standby mode in 4 minutes. www.dell.com/P2X22H or 66 │ Troubleshooting