Dell PowerApp 200 Rack Installation Guide - Page 17
the doors, perform the following steps.
View all Dell PowerApp 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
,QVWDOOLQJWKH5DFN.LW NOTE: For instructions on installing the system itself, see Installing the System in the Rack found later in this guide. To install the rack kit in the rack, perform the following steps: 1. Remove the racks front and back doors. 2. Install the slide assemblies in the rack. The subsections that follow include instructions for performing these tasks. 5HPRYLQJWKH'RRUV)URPD8RU85DFN You must remove the doors from the rack to provide access to the interior of the rack and to prevent damage to the doors while installing the computer system. To remove the doors, perform the following steps. &$87,217RSUHYHQWSHUVRQDOLQMXU\GXHWRWKHVL]HDQGZHLJKWRIWKH GRRUVQHYHUDWWHPSWWRUHPRYHWKHGRRUVE\\RXUVHOI 1. Open the latch on the front door. If you have a 24-U (1 U=1.75 inches) rack cabinet , unlock and twist the handle clockwise and open the door (see Figure 2). support.dell.com Dell PowerEdge 2x50 and PowerApp 200 Systems Rack Installation Guide 3