Dell PowerApp 200 Rack Installation Guide - Page 28
Installation and Troubleshooting Guide
View all Dell PowerApp 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4. Attach the input/output (I/O) cables to their respective expansion cards on the back of the system. 5. Install the strain-relief bracket to the back of the system (see Figure 12): a. Thread the I/O cables you connected in step 4 through the slots of the strainrelief bracket. b. Insert the ends of the four long portions of the strain-relief bracket into the four matching holes beside the hinge bracket. c. Secure the captive thumbscrew to the back of the system. bracket inserted into four holes Velcro strap cables to expansion cards strain-relief bracket captive thumbscrew )LJXUH$WWDFKLQJWKH6WUDLQ5HOLHI%UDFNHW 6. Connect the remaining cables to the system. For details, see your systems Installation and Troubleshooting Guide or the Users Guide. 14 Dell PowerEdge 2x50 and PowerApp 200 Systems Rack Installation Guide