Dell PowerConnect 5548 User Guide - Page 273

- Console/Telnet/Secure Telnet Line Aging (1-365) - Check to set the amount of time in days that elapses before a line password is aged out. Enter the number of days after which the password expires. - Expiry Date - Displays the expiration date of the line password. - Lockout Status - Displays whether the user currently has access (status Usable), or whether the user is locked out due to too many failed authentication attempts since the user last logged in successfully (status Locked). - Reactivate Locked Line - Check to reactivate the line password for a Console/Telnet/Secure Telnet session. Access rights can be suspended after a number of unsuccessful attempts to log in. Assigning Line Passwords Using CLI Commands The following table summarizes the CLI commands for setting fields displayed in the Line Password page . Table 9-46. Line Password CLI Commands CLI Command line {console|telnet|ssh} password password [encrypted] no password Description Identifies a specific line for configuration and enters the Line Configuration command mode. Sets a password on a line. Use the no form of this command to remove the password. The following is an example of the CLI commands: console(config)# line console console(config-line)# password dell Dell PowerConnect 55xx Systems User Guide 273