Dell PowerConnect 5548 User Guide - Page 61

other accounts and change privilege levels later. For more information on setting up user accounts and changing privilege levels, see the user documentation. To set up a user account: Enter the user name: Please enter the user password: Please reenter the user password: 8 Enter the following: • User name, for example "admin" • Password and password confirmation. 9 Press Enter. The following information is displayed: Next, an IP address is setup. The IP address is defined on the default VLAN (VLAN 1). This is the IP address you use to access the Telnet, Web interface, or SNMP interface for the switch. To set up an IP address: Please enter the IP address of the device (A.B.C.D): Please enter the IP subnet mask (A.B.C.D or nn): 10 Enter the management IP address and IP subnet mask, for example 192.168.2.100 as the IP address and 255.255.255.0 as the IP subnet mask. 11 Press Enter. The following information is displayed: Finally, set up the default gateway. Please enter the IP address of the gateway from which this network is reachable (e.g. 192.168.2.1).Default gateway (A.B.C.D):[0.0.0.0] Dell PowerConnect 55xx Systems User Guide 61