Dell PowerConnect 6024F Command Line Interface (CLI) Guide (.htm) - Page 110

www.dell.com | support.dell.com • hostname - Hostname of the server. (Range: 1-158 characters) • poll - Enable polling. • keyid - Authentication key to use when sending packets to this peer. (Range:1-4294967295) Default Configuration No servers are defined. Command Mode Global Configuration mode User Guidelines Up to 8 SNTP servers can be defined. Use the sntp unicast client enable global configuration command to enable Unicast clients globally. To enable polling globally, you should also use the sntp unicast client poll global configuration command. Polling time is determined by the sntp client poll timer global configuration command. To define an SNTP server on the out-of-band port, use the out-of-band IP address format oob/ip-address. Examples The following example configures the device to accept Simple Network Time Protocol (SNTP) traffic from the server on 192.1.1.1. Console(config)# sntp server 192.1.1.1 show clock The show clock user EXEC command displays the time and date from the system clock. Syntax show clock [detail] • detail - Shows timezone and summertime configuration. Default Configuration This command has no default configuration. Command Mode User EXEC mode 110 Clock