Dell PowerConnect Brocade M6505 Quick Start Guide - Page 10

Brocade M6505 16 Gbps Fibre Channel SAN I/O Module QuickStart Guide

Add to My Manuals
Save this manual to your list of manuals

8 Brocade M6505 16 Gbps Fibre Channel SAN I/O Module QuickStart Guide 53-1002577-01

Section	Page
QSG_title	1
QSG	3
Brocade M6505 16 Gbps Fibre Channel SAN I/O Module QuickStart Guide	3
Prepare the M1000e Blade Server Enclosure for the switch	3
Insert the SAN I/O Module in the Blade Server Enclosure	3
Insert additional SFP+ transceivers in the SAN I/O Module port (Optional)	4
Handling SFP+ transceivers	5
Set the IP address	5
Using the CMC GUI to set the IP address	6
Using the CMC CLI to set the IP address	6
Connect the cable to the SFP+ transceiver	7
Establish an Ethernet connection	8
Enable Native Fabric mode (Optional)	8
Disable Access Gateway mode	8

Match case Limit results 1 per page

Brocade M6505 16 Gbps Fibre Channel SAN I/O Module QuickStart Guide

53-1002577-01