Dell PowerConnect W-AP124 Dell PowerConnect AP-120-MNT-WJ Access Point Enclosu - Page 1

AP-120-MNT-WJ Access Point Enclosure Installation Guide Introduction The AP-120-MNT-WJ access point (AP) enclosure allows you to install an AP-121 or AP-125 access point on the wall, directly over an installed junction box. Additionally, this enclosure can be mounted to the ceiling, using ceiling tile rails. The AP-120-MNT-WJ kit includes the following pieces: z Plastic base to attach over a standard installed junction box or ceiling tile rail z Plastic enclosure cover z The following plastic connector plate styles: „ 1x Keystone connector plate „ 1x Siemon connector plate „ 1x Blank plate z Blank fillers for unused connectors „ 2x Keystone „ 2x Siemon z 1x M4 x 25mm T-20 Torx screw z 1x T-20 Torx key z 1x white paper label sheet z 2x clear window to cover labels z 9/16" rail adapter Top Cover Base Parts not to scale T-20 Torx Key Blank Plate M4x25mm Torx Screw Siemon Connector Plate Clear Windows 9/16" Rail Adapter Keystone Blanking Plates Keystone Connector Plate Siemon 45* Blanking Plates APenc_011 Additional Tools z A screwdriver that matches the screws in the cover plate over the installed junction box z (Optional) flat-head screwdriver or similar tool to punch out antenna access cutouts 0510583-03 | July 2010 1