Dell PowerConnect W-AP124 Dell PowerConnect W-AP120-MNT-CV Access Point Enclos - Page 1

AP-120-MNT-CV Access Point Enclosure Installation Guide Introduction The AP-120-MNT-CV access point (AP) enclosure is designed to provide some protection and limited access to an AP-121 or AP-125. The AP-120-MNT-CV can be installed directly over a standard junction box or on the ceiling, using ceiling tile rails. To install the AP-120-MNT-CV on a wall, proceed to "Installing the AP-120-MNT-CV on a Wall" on page 2. To install the AP-120-MNT-CV on a ceiling, proceed to "Installing the AP-120-MNT-CV on a Ceiling" on page 5. The AP-120-MNT-CV kit includes the following: z 1x Plastic base, which attaches to the AP z 1x Plastic cover, which hides the AP's ports z 1x Plastic outlet-mounting plate z 1x 9/16" ceiling tile adapter z 1x 15/16" ceiling tile adapter Base Parts not to scale Cover Mounting Plate AP120_006 9/16" Rail Adapter 15/16" Rail Adapter Additional Tools z A screwdriver that matches the screws in the cover plate over the installed junction box z (Optional) flat-head screwdriver or similar tool to punch out antenna access cutouts 0510596-02 | July 2010 1