Dell PowerConnect W-Airwave W-Airwave 7.2 User Guide - Page 47
Enabling AWMS to Manage Your Devices, Configuring Communication Settings for Discovered Devices
View all Dell PowerConnect W-Airwave manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Enabling AWMS to Manage Your Devices Once AWMS is installed and active on the network, the next task is to define the basic settings that allow AWMS to communicate with and manage your devices. Device-specific firmware files are often required or are highly desirable. Furthermore, the use of Web Auth bundles is advantageous for deployment of Cisco WLC wireless LAN controllers when they are present on the network. This section contains the following procedures: Configuring Communication Settings for Discovered Devices Loading Device Firmware Onto AWMS (optional) Overview of the Device Setup > Upload Firmware & Files Page Loading Firmware Files to AWMS Configuring Communication Settings for Discovered Devices To configure AWMS to communicate with your devices, to define the default shared secrets, and to set SNMP polling information, navigate to the Device Setup > Communication page, illustrated in Figure 21. Figure 21 Device Setup > Communication Page Illustration Perform the following steps to define the default credentials and SNMP settings for the wireless network. 1. On the Device Setup > Communication page, locate the Default Credentials area. Enter the credentials for each device model on your network. The default credentials are assigned to all newly discovered APs. Dell PowerConnect W AirWave 7.2 | User Guide Configuring AWMS | 47