Dell PowerEdge 6800 Upgrade the BIOS Before Upgrading Your System (.pdf) - Page 6

Reconfiguring the System for Regional Power Requirements CAUTION: If you relocate a system operating in the 120-127 VAC or 200-240 VAC range to a different geographic area, ensure that jumper CB_TYPE matches the AC line voltage range of your new location. If the new power source is less than 120 VAC and you do not reconfigure jumper CB_TYPE for the lower voltage power source, damage to the system power cable or the system itself may occur. Table 1-1 lists countries where the AC line voltage may be less than 120 V. Confirm the power source in your particular location and reconfigure the CB_TYPE jumper if necessary. Table 1-1. Areas Where AC Line Voltage May Be Less Than 120 V AC Line Voltage Country 100 V Japan, Korea, Okinawa 105 V Korea 110 V Anguilla, Azores, Belgium, Belize, Bolivia, Brazil, Colombia, Curacao, Dominican Republic, Ecuador, El Salvador, France, Guam, Guyana, Haiti, Honduras, Jamaica, Lebanon, Panama, Peru, Philippines, Somalia, Surinam, Tahiti, Taiwan, Turkey, Virgin Islands 115 V Aruba, Barbados, North Mariana Island, St. Pierre & Miquelon, Surinam, Tonga, Trinidad & Tobago Table 1-2 and Figure 1-1 show the settings and location of the CB_TYPE jumper. Table 1-2. Power Configuration Jumper Settings Jumper CB_TYPE Setting Description AC line voltage is 120 V or greater* (default) AC line voltage is less than 120 V * This jumper is not functional for systems using a line voltage in the range of 200-240 VAC. 4 Information Update