Dell PowerEdge C5220 Hardware Owner's Manual - Page 56

Supported Memory Configura- Memory Type/Size CPU DIMMs Type tion Memory Rank Type Speed (x8, x4) (MHz) Component Total DIMM Slot Density Size A1 A2 A3 A4 12 sled DDR3 ECC 1 2 VLP 1333 2R x8 2Gb UDIMM/4096 MB*2 UDIMM 8G • • 12 sled DDR3 ECC 1 4 UDIMM/2048 MB*2+4096 MB*2 VLP 1333 UDIMM 2R x8 1Gb/2Gb 12G 2G 4G 2G 2G 12 sled DDR3 ECC 1 4 VLP 1333 2R x8 2Gb UDIMM/4096 MB*4 UDIMM 16G Removing a Memory Module WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product. 1 Remove the sled from the system. See "Sled Configuration" on page 51. 2 Push the locking latches of the DIMM slot outwards. See Figure 3-5. 3 Remove the memory module from the system. 56 Installing System Components