Dell PowerEdge C5220 Hardware Owner's Manual - Page 67
Installing a 2.5-inch Hard-Drive Board
View all Dell PowerEdge C5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installing a 2.5-inch Hard-Drive Board 1 Place the new hard-drive board in the sled and connect to the system board . 2 Replace the eight screws to secure it in place . 3 Connect the four SATA cables between the hard-drive board and the system board. 2.5" HDD 2.5" HDD 2.5" HDD 2.5" HDD HDD0 HDD1 HDD2 HDD3 HDD3 HDD2 HDD1 HDD0 SATA3 SATA2 SATA1 SATA0 Removing a 3.5-inch Hard-Drive Board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Remove the hard drives. See "Removing a 3.5-inch Hard Drive" on page 62. 2 Remove the eight screws from the hard-drive board . 3 Disconnect the hard-drive board from the system board and lift out of the sled. Installing System Components 67